Installing a wood stove into a bell tent or yurt

Fitting instructions for Belltent flue kit.

• Secure round steel flashing plates onto either side of flue hole, Sandwiching the canvas between. (We recommend once fitted these plates are left in situ)

• For a waterproof seal add a bead of silicone between outer edge of exterior plate and canvas.

• Assemble base and back plates using fixings provided. (All the smaller bolts are for steel plates. Longer bolts are for clamps)

• Add green clamp to back side of back plate.

• Connect 500mm pipe to stove using pin and push in small length of fire rope between flue and collar of stove to seal.

• Position stove and plates inside tent and push the 500mm length through the flue hole.

• Go outside and add on 90 degree elbow and one length of pipe using locking bands to secure.

• Position flue stand and add in one length and secure using clamp and two small guys.

• When secure attach remaining length and rain cap.

• Use other guys from rain cap if required.

• Attach locking bands.  
• PICTURE LINK HERE